The 2-stroke engine is different from the 4-stroke motor in two
fundamental ways. Firstly, the burning cycle is finished within one single
piston stroke as oppose to two piston strokes, and second, that lubricating
petroleum for this motor is blended in with the petrol or fuel. In some
instances, such as lawnmowers, you are required to pre-mix the petroleum and
petrol yourself at the container, so pour it into the fuel vessel. In other
instances, e.g., little motorbikes, the motorcycle has the lower oil tank that
you take with 2 stroke oil and so the motor has a smaller pump which mixes the
oil and petrol together for you. This is in comparison to the ' ' four-stroke
engines", which involves four strokes of the piston to fill the state cycle
within two crankshaft revolutions. In the two-stroke engine, the ending of the
combustion attack and the start of the pressure stroke occur simultaneously,
with the inlet and discharge (or scavenging) functions happening at the same
time.
Quality makes the difference: The feeling of
the vessels, the main engine, is the support of the responsibility. The
maintenance makes sure it may work safely and as effective as possible.
An engine overhaul may
additionally be a daunting restore that once in a while takes quite a few weeks
to end. In addition to the engine overhaul itself, there are a
number of preservation duties that are associated to pulling the engine and
reinstalling it after the overhaul. Once the selection to overhaul the
engine has been made, the subsequent step for a proprietor is to determine on
the area for the engine removal. Some proprietors have their mechanic pull the
engine and ship it to an overhaul facility. Other proprietors
fly the aircraft to the overhaul region and let the overhaul professionals
remove, overhaul and reinstall the engine.
Let’s know the
overhauling of a two-stroke petrol engine.
1] Firstly, we
remove all parts from the engine, step by step such as alternator cover, clutch
cover, carburetor, engine head, engine block, and piston.
2] Now we remove
the internal parts of the engine such as clutch assembly, alternator, kick
shaft, gearing system, etc.
3] Check the
condition of overall parts such as alternator, clutch plate, bearing and all
gears.
4] In 2 strokes
overhaul some parts may be change and some parts may not change.
5] Now clean the
all old parts which are in reuse, you can clean this part with help of petrol
and then after removing all dust clean with high pressure water {only those parts which are washable}.
6] Please noted if
you disassemble the 2-stroke engine the first time, then make a video when you
open the engine it helps to rebuild process.
7] Finally all
clean and new parts are available to reassemble the engine.
Ø Change the all bearing.
Ø Fit all gearing system.
Ø Fit the crank shaft.
Ø Fit the clutch assemble.
Ø Connect the alternator with the shaft.
Ø Fit the both side covers.
Ø Connect the piston with the crank shaft.
Ø Now attached the engine block and engine head.
Ø And connect the spark plug into the engine head
Ø Finally your overall process is completed.
0 Comments